Category: Smart Tester
-
Smart tester errors and events
Errors and events during measurement #error100 #error110 #error111 #error112 #error113 #error120 #error121 #error122 #error123 #error124 #error210 #error 211 #error212 #error213 #error300 #error321 #error322 #error323 #error410 #error411 #error412 #error413 #error424 Errors & events during calibration of the measurement couvette Errors & events during checking of calibration of the measurement couvette (1) Errors & events during checking…
-
Pulling out the dropper head in the Smart tester
In this article, the correct method of pulling out the reagent pump head will be presented 2. Take out the measuring cuvette 3. Pull the dripper out of the holder and remove it to pull out the hose. Grasp the head and carefully pull it out a few millimetres so that the hose can be…
-
Adjustment of rubber bands in the dropper head pump
This article will show the correct method for adjusting the rubber bands on the dropper pump 2. Measure the distance between the two blue rubber bands. If it is more than 40 mm, it should be corrected to such a distance. 3. After correcting the distance between the bands to exactly 40 mm, assemble the…
-
How to mount the Smart tester correctly
Mounting the device on a DIN rail The Smart tester has a DIN rail, which we mount in the cabinet or outside the cabinet then mount the Smart tester on this. The Smart Tester should not be placed above an aquarium, SUMP or other water tank so that if the unit fails, the water tank…
-
-
How to prepare a Smart tester for shipping 📦
In this article you will learn how to properly prepare the Smart tester device for shipment so that it is safe for the device. ⚠️ CAUTION: When touching the reagent cartridges, the measuring cuvette, and other items in contact with the reagents, maintain personal protective equipment according to the label on the cartridge package or…